Solar water heater boiler, 160 liters, double or triple energy, to replace an old solar boiler. Compatibility with most solar panels on the market. Note: The boiler with polygonal housing is offered only in complete solar.
SPECIFICATIONS
Nominal boiler capacity | 160 liters |
Boiler dimensions | 500x1250mm |
Heater Container Weight | 65 kg |
Heater Type | Closed circuit (with sheath) |
Cylinder material | Low Carbon Steel 2.5mm |
Jacket material | Low Carbon Steel 1.5mm |
Internal protection | Double Enamelling, baked at 860 ° C |
Additional protection | Magnesium rod |
External housing of the boiler | Anodized aluminum or pre-galvanized sheet metal |
Water heater insulation | Ecological polyurethane 50-60 mm thick without CFC & FCKW |
Electrical resistance (Copper) | Available from 0.8 KW to 4 KW, single phase |
Maximum operating pressure | 8bar |
Thermostat | Bipolar of four contacts |
Maximum operating temperature | 95ºC |
Mantle test pressure (alternator) | 5bar (EN 12976-1/2006, 4.1.6) |
Maximum mantle operating pressure (alternator) | 3,2bar |
Why choose a solar water heater HELIOAKMI MEGASUN
The internal cleaning of the tank is done by sandblasting (throwing metal balls) to create a rough surface, in order to achieve absolute adhesion and adhesion of the enamel to the inner surface of the container, giving it twice the life.
The double inner enamel of the boiler, which is baked at 860 ° C, offers resistance to water with a high content of salts and makes it safe for public health.
Maximum operating temperature 95ºC
It is a closed circuit boiler and due to its operation with antifreeze, it can withstand up to many degrees below zero.
It has 26 International and Greek Quality Certificates!