52 / 100

Solar Heating

Solar Heating

Solar space heating, Solar heating, Solar home heating systems, Solar heating, Solar heating systems

EASY, QUICK, AND ECONOMICAL SOLUTION FOR SPACE HEATING AND HOT WATER WITH SOLAR ENERGY

HELIOAKMI (MEGASUN) provides the solution to save energy with solar panels for space heating and domestic hot water with a Buffer-1 tank with INOX domestic hot water exchanger.

INDICATIVE LAYOUT OF SOLAR HEATING SYSTEMS

Typical Installation of BUFFER-1 Container with INOX domestic hot water exchanger & nbsp; for connection to solid fuel boiler, oil / gas boiler,
heat pump, high temperature heating system (radiator), low temperature heating system (internal) with solar assistance

buffer scheme 1

A three-way mixing valve with motor and electronic device to compensate for the outside temperature is installed in this heating circuit. The auxiliary energy source (eg boiler) is activated only when the supplied solar energy is insufficient. This system is:

1. SIMPLE

The system is simple and works like a central solar system for rushed traffic.

2. ECONOMIC
It has lower costs compared to other complex heating assistance systems and separate water management.

3. EASY TO INSTALLATION
An easy-to-use guide contains all the installation information, without additional complex automation.

4. COMFORT
Provides continuous hot water operation and heating 24 hours a day with maximum utilization of free solar energy.

5. END OF OVERHEATING IN THE SUMMER MONTHS
The water we consume during the summer months does not allow the container to overheat. If this is not enough, due to the special design of the tank, the overheating valve provides the solution with artificial consumption.

6. ECOLOGICAL
Highly efficient management of free and green solar energy avoids CO2 and greenhouse gas emissions.

Depending on the engineering study, a different combination of products and materials may be proposed.

The system and all its components can be delivered to the customer packaged.

  • The tanks are placed on a wooden pallet and secured with stretch film.
  • The collector (s) are packed with 4 protective plastic corners adapted to its shape and tightened with a plastic belt around the perimeter.
  • The hydraulic kit, the differential thermostat with the sensors, the container expansion tank, antifreeze container, and all hydraulic components required to install the system (except cables and pipes) are packed in one carton.
megasun syskevasia all
The installation of solar systems for the supply of hot water (collector, water storage tank, support base, piping, boiler, inertia tank, etc.) is subsidized by the program “ ΕΞΟΙΚΟΝΟΜΩ ΑΥΤΟΝΟΜΩ “of the Ministry of Environment, Energy & amp; Climate Change.