Solar Heaters
MEGASUN Solar Hot Water Heaters - Thermosyphon Solar Water Heating Systems - Solar Panels - Solar Heater Supplier, Greece Europe
Save on electricity bills and protect the environment with the MEGASUN state-of-the-art solar water heaters.
The MEGASUN solar panels and solar heaters are globally known for their excellent quality, great performance and resistance to any conditions, allowing economy on power and thus protection of the environment
Solar heaters 120, 160, 200, 260 and 300 lt
Solar Panels Type ST-2000 et ST-2500 Selective
13 points of technological superiority
1. GUARANTEED ENDURANCE NEXT TO THE SEA
Most solar water heaters are manufactured with black or painted sheet metal, materials that corrode and have a short life span, especially in areas close to the sea. The MEGASUN storage tank has an exterior polygonal casing made from anodized aluminium, which is extremely durable to ultraviolet rays, in humid climates, and in coastal areas.
2. THE MEGASUN DOES NOT FREEZE
The advanced design of the sealed jacket around the storage tank in the closed system of the MEGASUN Solar Water Heater guarantees the operation of the system in freezing conditions, and also secures the collectors against corrosion and from interior clogging.
3. MEGASUN SECURES MORE HOT WATER IN THE WINTER
The strong polyurethane insulation with 50mm thickness and high density (40 Kg/m³) guarantees the consumer more hot water for use even when the temperature outside is -30o C.
4. DOUBLE LIFE SPAN
The metallic storage tank of MEGASUN is 3mm thick and is made according to DIN 4800-5. That means the tank is twice as resistant to high-pressure water supply networks than most ordinary solar water heaters.
5. GUARANTEED ENDURANCE OF STORAGE TANK FROM HARD WATER
The inside of the storage tank is protected against corrosion by DURO SMALT ELASTIC. This unique method of protection is considered the most successful for its resistance to the hardest water and its elasticity enables it to follow the expansions and contractions of the tank, eliminating the risk of cracks that are created in most other storage tanks that use other processes of enamelling.
6. HOT WATER IN COMBINATION WITH THE CENTRAL HEATING SYSTEM
The electrical resistance of the MEGASUN units can be fitted with a tube exchanger (upon request) which can be connected to the central heating system achieving even more energy saving.The electrical resistance of the MEGASUN units can be fitted with a tube exchanger (upon request) which can be connected to the central heating system achieving even more energy saving.
7. THE MEGASUN SOLAR COLLECTORS HAVE TRIPLE DURABILITY
Most solar panels due to flaws in their design do not have air holes, allowing in moisture to accumulate inside the collector due to the difference in temperature, especially in wet climates. This results in the corrosion of the absorber. The profile of the MEGASUN solar panel is designed in such a way so as to keep the 4 air holes completely water tight and at the same time do not allow the entrance of rain water.
8. THE MEGASUN REACTS BETTER
Beacause only the MEGASUN solar panel is manufactured with copper channels, which fasten tightly with the Ultrasonic method. With this unique method the heat transfer is achieved completely allowing the MEGASUN to have a more effective collector.
9. THE MEGASUN COLLECTOR UTILIZES THE DIRECT & INDIRECT SUN RAYS
The copper titanium surface of the solar panel in combination with the Solar Tempered Glass with its specialized crystals, minimize the reflection of the direct sun rays and make the MEGASUN collector the only collector with such a high output.
10. STEADY PERFORMANCE WITHOUT HEAT LOSSES
The double insulation made from 40mm thick rock wool and 20mm thick fiberglass insulation that is placed on the sides, secure the high performance and minimize the heat losses from the MEGASUN collector.
11. SECURITY AND RELIABILITY
In most countries of the world, all solar panels have unbreakable glass to withstand hale and prevent any accidents. The MEGASUN collector has a special TEMPERED GLASS (3.5mm thick), following the strict International safety rules.
12. SUPERB DESIGN AND EASY INSTALLATION
The excellent outer design of the unit along with the well designed support base, allow for the easy and adjustable installation of the unit on top of tiled or any other type of roofs. Moreover, the side coverings of the collector protect the connection pipes from the ultraviolet rays and offer at the same time a nice aesthetic look that could be incorporated in every architectural building design.
13. INNOVATION IN MAINTENANCE
The independent position of the magnesium rod allows for its quick and easy replacement.
MEGASUN is manufactured under the strictest international standard specifications and its production is inspected at each production stage. All units have a special identification quality and inspection badge proving they have been inspected to ensure the highest quality.
Beyond these points of superiority, MEGASUN solar heaters and solar panels are preferred by consumers in 76 countries all over the world and is what makes it stand out among standard solar water heaters.
Download the installation guide and technical specifications in pdf form to view all details about MEGASUN solar water heaters
Beyond these points of superiority, MEGASUN solar heaters and solar panels are preferred by consumers in 76 countries all over the world and is what makes it stand out among standard solar water heaters.
MEGASUN
SOLAR WATER HEATERS by HELIOAKMI S.A.
Nea Zoi, Aspropyrgos
19300, Attiki, Greece
Tel. +30 (210) 5595624
or 5595625 or 5595626
Fax: +30 (210) 5595723
E-mail: megasun@helioakmi.com
International Recognition with proofs
-
Greece -
Germany -
Spain -
Greece -
The Netherlands -
Korea -
Italy -
Botswana -
European Union -
Slovvenia -
Switzerland -
European Union -
Spain -
France -
ISO 9001-2008 TUV NORD -
Australia -
Algeria -
Australia -
South Africa -
Portugal -
European Union







